[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: G-5400B output voltages



they should be 0 to 5 volts. 

pin 1 is elevation 0-5v
pin 2 is right (open normally, to ground on command)
pin 3 is up (open normally, to ground on command)
pin 4 is left (open normally, to ground on command)
pin 5 is down (open normally, to ground on command)
pin 6 is azimuth  0-5v
pin 7 is power  9-14v
pin 8 is ground  both circuit and power

73...bruce




============================================================================
Bruce Paige, KK5DO                         Internet: kk5do@amsat.org
Houston, Texas                                   or: kk5do@hal-pc.org
AMSAT Area Coordinator                      
ARRL Awards Manager (WAS, 5BWAS, VUCC), VE                     
Houston AMSAT Net - Tuesday, 8PM CDT on GE-1 (W1), T12, 5.7MHz at 103 deg
Also affiliated repeaters in North America. Also available on Real Audio at
http://www.amsatnet.com                Visit SHOT http://www.clarc.org/shot
============================================================================ 
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home