[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Station Program Question



Ken,
 
I did what you recommended beforehand.  As a matter-of-fact, I created three different profiles - one called Mir PMS, one called SAFEX/Mir, and one called 70cm QSO.  I included the frequencies for each and the PL tones where needed (according to the ANS that comes out weekly.
 
I had this problem once before (after I got the program registered) and it was a fairly simple solution - something like re-loading the elements.  I have done that numerous times, but I can't get this problem solved.

Thanks.
 

Joel B. Black
jbblack@mindspring.com
ks4aw@amsat.org
 
-----Original Message-----
From: Kenneth J. Ernandes <n2wwd@mindspring.com>
To: jbblack@mindspring.com <jbblack@mindspring.com>
Date: Friday, February 26, 1999 8:23 PM
Subject: Re: [amsat-bb] Station Program Question

You need to set the spacecraft ID and catalog number at the top of the SAREX/Mir console dialog box.  You need to save each spacecraft/transponder combination with a unique name, but can have up to about 10 frequencies on TX and RX for each transponder.
 
73, Ken N2WWD
 
-----Original Message-----
From: jbblack@mindspring.com <jbblack@mindspring.com>
To: amsat-bb <amsat-bb@AMSAT.Org>
Date: Friday, February 26, 1999 8:58 PM
Subject: [amsat-bb] Station Program Question

I have finally gotten my station together and monitored the FO-29 beacon this afternoon around 2225 UTC.  Now, I have a question about The Station Program:
 
    1.  I have configured the SAREX/MIR Console Mode but when I try to use the information I have provided it gives me the following message:
 
        "The satellite 'SAREX/MIR' could not be found in the database."
 
I have tried changing the name in the Keps, but to no avail.  Can someone please help with this problem?

Thanks.
 
 


AMSAT Top AMSAT Home