[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: Re: 92 ohm line

Now let me figure this one out...

If I run two pieces of RG-58 in parallel, I get 25 ohms.

So would that mean...

If I run 2 pieces of RG-58 in series, I get 100 ohms???

I wonder!!!

Vy73,  Mike.  KD9KC.  MARS: AAV6EV
kd9kc@whc.net    -    kd9kc@amsat.org
Home  page:   http://www.qsl.net/kd9kc/
El Paso, where the sun spends the winter.

-----Original Message-----
From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
Behalf Of Tovar
Sent: Friday, February 26, 1999 11:34 PM
To: Richard@g3rwl.demon.co.uk
Cc: amsat-bb@AMSAT.Org
Subject: Re: [amsat-bb] Re: 92 ohm line

    First time I ever needed ~100 ohm line I paralleled three lengths of 300
    ohm ribbon (taped closely together). It worked.

Another way is to run each line down the center element of two lengthes of
RG58 (or whatever's convenient).

Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org