If you're receiving only then setup a Beacon definition, otherwise simplex in-band is setup using the SAREX option.
I would suggest the beacon if the freq is fixed, that will sort out the Doppler for you.
From: KF4FDJ (Mike in Ft. Myers, FL) [mailto:email@example.com]
Sent: Monday, February 22, 1999 6:54 PM
Subject: [amsat-bb] MIR SSTV and the Station Software
I am using the Station software, in conjunction with the KCT. I had to
be out today, and left the station unattended. I received some partial
pictures today that looked quite interesting. Since I haven't been able
to figure out how to get station to compensate for a simplex FM
frequency, the automation was incomplete, although Station will control
rotor movements through the KCT.
Has anyone figured out how to automate this task using Station? I can
fool it by setting up a full duplex console, and setting the frequency
"mid-passband," but the only FM mode available is NFM, which doesn't
seem to be wide enough for use. I haven't been able to correctly
configure the Sarex consoles, and haven't been able to make those work
If someone has a strategy which works, please let me know. I wish I had
been there today to tune, as what I did receive looked very nice indeed.
Thanks and 73, Mike firstname.lastname@example.org
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org