[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Dsp2232 & Pacsats Problems

Norman, you should not have to use an amplifier to operate through the
digital satellites. I operate with a TS-790 "barefoot'.  What sat's are you
using and are you seeing any data coming from the satellite. 9.6 k sat's
require a mod of the radio. There are mod's for the DSP unit to enhance it's
performance but it will operate off the self just fine. 73 John, KE3SU
-----Original Message-----
From: ***** <grneon@ssm.ca>
To: AMSAT-BB <amsat-bb@AMSAT.org>
Date: Thursday, March 26, 1998 10:36 PM
Subject: Dsp2232 & Pacsats Problems

>I would like to know if there is some mods that I should do to the dsp2232
>for the pacsats. During connects I am timed out. I am using a little over
>100 watts to a pair of hygain X yagis with a ft736r and a brick amp. Would
>like to use less power as I think this is an over kill, if possible would
>like to use 736r bare foot.
>What settings should I have for wisp and tnc?? I am using the defaults
>provided with wisp.
>Any suggestions and experiences???
>Thanks to all in advance.
>Norman VE3CJE